You must ensure your home has a primary water heater to provide the initial hot water supply before you begin your bath. If you attempt to heat a full 84-gallon capacity from a cold start, you will likely face a long wait or a failed cycle, resulting in a tub that does not reach the desired temperature.
Empava walk in tub heater maintains water temperature rather than heating large volumes
The Empava Walk In Tub includes a built-in heater designed to keep water at a steady temperature rather than act as the primary heat source for the entire volume. We selected this model for our comparison because it features 13 water jets and 12 bubble jets for circulation while offering a low threshold for accessibility. Because this is a walk-in tub—a large bathtub with a door and a low step for easier entry—the distinction between maintenance heating and primary heating is critical for user comfort. If the primary water source is too cold, the internal system may struggle to reach the upper 104F limit in a reasonable timeframe.
You can see how the Empava Walk In Tub performs in our detailed spec breakdown.
What to Check Before Buying the Empava Walk In Tub
Verify these technical details to ensure the tub functions correctly in your bathroom layout before you place an order.
For a side-by-side look, see our comparison of the Empava Walk In Tub.
- Confirm your home has a high-capacity water heater to provide the primary flow rate of hot water.
- Verify the electrical circuit requirements to ensure the built-in heater has a compatible power source.
- Measure the available floor space to ensure the 59-1/16″L by 30″W footprint fits your alcove.
- Check for a dedicated area to provide proper ventilation and drainage for the heater unit.
- Ensure your bathroom plumbing can accommodate a right-drain configuration.
Alternative Options for the Empava Walk In Tub
Buyers who require a tub that can heat large volumes of water from a cold start should look for models with high-output external heating systems or integrated heavy-duty heating elements. If your primary water source is consistently cold, a tub with a larger heating capacity or a different thermal design may be necessary to avoid long wait times. This specific model is best suited for users who already have a reliable hot water supply and primarily need a tub that keeps the water warm during a long soak.
Consider an accessible bathtub for home renovation to improve your living space.
If you have a consistent hot water supply and need a tub with 13 water jets and a low threshold, the Empava Walk In Tub is a practical choice for your bathroom.
More walk-in tub explainers and comparisons
Bathroom Accessories World is reader-supported: some links on this page are affiliate links, and as an Amazon Associate Bathroom Accessories World earns from qualifying purchases at no extra cost to you. Learn more.
